3.5 3 20 0.50 2.6 + 3.6 1.2 - 0 0.05 1 0.10 0.5 0.10 13.6 0.30 1.8 0.20 17.3 0.30 3.3 0.20 4 1 3 2 10 0.50 1.35 + - 0.10 0 scale: weight: part number 5 4 3 2 1 x.x: 0.5 mm x: tolerances: dimensions are in millimeters a initial release 877.670.7118 www.tensility.com 800 20802 sockeye place #130 541.323.4202 fax 2:1 541.323.3228 tel notes bend, or 97701 usa 0.05 mm description: nickel plated, molding type, white insulators sheet 1 of 1 size a 50-00315 connector, dc plug, 3.5x1.35xl20mm, brass, function test: no open, no short circuit, no int date description revision 11/7/2012 rohs compliant x.xx: 0.3 mm materials ?? 1. insulation block, pom, yellow ?? 2. insulator, pbt + 15% glass fiber, white ?? 3. shell, c3604 brass, 2 m nickel plated ?? 4. spring contact, c5191 phosphor bronze, 2 m nickel ?? plated ?? ?? electrical requirements ?? dielectric strength: 1 min @ 500 vac ?? insulation resistance: 100 m ? @ 500 vdc ?? contact resistance: 30 m ? or less ?? rated voltage: 20 vdc ?? rated current: 4 a ?? mechanical requirements ?? insertion force: 0.5-2 kgf ?? withdrawal force: 0.3-1.5 kgf ?? durability: 5000 mating cycles while maintaining; 0.4-2 kgf ?? insertion force, 0.2-1.5 kgf withdrawal force and a less than ?? 100 m ? contact resistance. ?? environmental requirements ?? damp test: 40 c, rh 90-100% for 96 hrs. cool to ambient ?? and recover for 2 hours. maintain dielectric strength of 500 ?? vac for 1 min, insulation resistance of 50 m ? @ 500 vdc ?? minimum and a contact resistance of 100 m ? or less. ?? ?? dry test: 70 c, rh 70-85% for 96 hrs. cool to ambient and ?? recover for 2 hours. maintain insulation resistance of 50 ?? m ? @ 500 vdc minimum and a contact resistance of 100 ?? m ? or less. ?? ?? salt spray test: 35 c, rh 90-95% , 5% nacl mist for 24 hrs. ?? wash parts after test. maintain mechanical requirements ?? and a contact resistance of less than 80 m ? . ?? operating range ?? -25 to 70 c, relative humidity of 85% or less 0.2 0.05 4.5 0.20
|
